Welcome to the Circuitpal guide
Circuitpal is an electronics simulator that runs in your browser. This guide shows you how to use it.
Your first circuit
Light an LED in a few minutes, on the sheet or on the 3D bench.
The screen at a glance
What every button, panel and tool is for.
The schematic sheet
Draw circuits like a textbook and read their numbers.
The 3D workbench
Build on a real-size breadboard, with legs that snap into holes.
Lessons and challenges
Guided steps that check your work, and circuits to build or repair.
Parts reference
All 83 parts: what they do, their pins and their values.
What Circuitpal is good for#
- Learning how circuits behave: Ohm's law, dividers, RC filters, transistors, logic gates, timers, sensors, motors.
- Trying an idea before you touch a soldering iron, and seeing what a wrong connection does without breaking anything.
- Showing a class or a friend what the current is doing, with an oscilloscope, meters and live numbers.
What it is not#
It is a learning tool, not engineering software. The simulation is a simplified model of real parts, so results are approximate and real parts vary. Do not rely on it for anything where a mistake could hurt people or damage property. See How accurate is it?
Free, and your work stays with you#
You do not need an account or to install anything. Your circuits are saved in your own browser and in files you export; nothing is uploaded unless you choose to share it. See Saving, files and sharing and the terms and privacy page.