Open the simulator

Advanced simulations

Optional real physics for the 3D workbench: gravity, magnets, wind, heat, light and more. All off until you switch them on.

Open the Advanced simulations panel in the details area of the 3D workbench (when nothing is selected). The simulations run only while the circuit runs, and Stop puts every part back where it was. They are approximations built from the textbook equations; they are meant to show how things behave, not to predict an exact result.

Rigid bodies and gravity#

Rigid bodies makes loose parts and imported models solid so they collide. Gravity lets them fall and come to rest. Parts plugged into a board, and the boards themselves, stay fixed.

Material physics#

Weight, friction and bounce come from what each part is made of (steel, copper, plastic, rubber, glass, wood and more). Metals conduct electricity and plastics do not; steel and iron are magnetic.

Aerodynamics and wind#

Air pushes on parts depending on the angle each face meets it. Set the wind's speed, direction, up or down angle and gustiness.

Magnetism#

Add a Magnet (a disc or a bar, neodymium or ferrite). With Rigid bodies and Magnetism on, magnets pull and turn each other (north attracts south, like poles push apart) and pull on steel and iron, including a magnet hanging from a steel plate. Copper, aluminium and plastic feel nothing. The pull falls steeply with distance. A magnet holds up to about four times its own weight in the simulation, however strong the real one is.

Conduction by contact#

With Conduction by contact on, a metal body (an imported model made of metal, or a metal magnet) that touches bare legs connects them. A coin dropped across the two legs of a resistor shorts it. Plastic and ferrite do not conduct.

Light and shadows#

Light emission makes LEDs and lamps light up their surroundings, and a photoresistor reads the light that actually reaches it. Shadows lets parts block the light. Choose the room lighting from dark to bright.

Heat and airflow#

With Heat and airflow on, parts lose heat to the gas around them: still air, wind, and the jet from a motor's propeller (forced convection). The gas (air, nitrogen, helium, carbon dioxide and others) and its pressure matter, and in a vacuum only radiation is left. Parts that give off heat (resistors, LEDs, motors) also warm the air nearby, and temperature sensors and neighbouring parts feel it a few seconds later.

Closed box#

Closed box puts the circuit in a sealed box: the air inside warms until the walls pass on as much heat as the parts make. Choose the box size, the walls (plastic, metal, foam or vented case) and the warm-up speed. Real plastic boxes warm up over minutes, so the speed-up makes it quicker.

Motors, gears and propellers#

A Motor is a bare part you attach a gearbox, pinion or propeller to. The propeller is the fan: its thrust, its air speed and the power it takes come from a blade-element model that was checked against measured data of real propellers (within about 10 % on the ones tested). The motor's current, heat and stall behaviour are modelled too.

Springs and cloth#

A Spring pulls and pushes with a force you set; hang a weight on it and it bobs. Cloth can fall, hang as a flag, or stretch as a trampoline.

Imported models#

Import 3D… in the bottom bar loads a model from another program (glTF, GLB, OBJ, STL, PLY, Collada, FBX or 3MF, up to 40 MB and 150,000 triangles). Set its real size and what it is made of, so its weight, friction, conduction and magnetism are right, and choose whether it is fixed or free to move. The model file is kept in your browser, not inside saved designs, so re-import it on another computer.