The schematic sheet
Draw circuits as symbols and wires, run them, and read the voltages and currents.
Placing and moving parts#
- Drag a part from the list onto the sheet, or click it in the list to add it.
- Drag a part to move it. Drag empty space to slide the whole sheet. The mouse wheel (or a pinch) zooms.
- Press R to rotate the selected part, Del to delete it, L to lock it so it cannot be moved by accident.
- Right-click (or long-press on a touch screen) for a menu with lock, rotate and delete.
- Ctrl+Z undoes, Ctrl+Y (or Ctrl+Shift+Z) redoes.
Wiring#
Drag from a pin to another pin to connect them. Choose the wire tool (E) in the bottom bar to draw several wires in a row, and the select tool (V) to go back. Every circuit needs a Ground as the reference for voltages.
Changing values#
Click a part and edit its values in the details panel. Values accept engineering suffixes: 4.7k, 100n, 2.2M. Switches and buttons are operated by clicking them on the sheet.
Selecting several parts#
Double-click and drag on empty canvas (or hold Shift and drag) to draw a box around parts. You can then move them together, and right-click for Convert to 3D or Export selection.
Running#
Press Run. Wires show the flow of current, LEDs light, meters read, motors turn. Stop freezes it, and the Step button next to it (the time step menu) sets the accuracy. If you change a value while it runs, the circuit adapts at once.
Notes and drawing#
Use the shapes and text tools to label your circuit. They are not part of the circuit and are not simulated.
Moving to 3D#
Select part of your circuit (or all of it), right-click, and choose Convert to 3D. The parts appear on a breadboard with jumper wires, so the 3D circuit has the same connections. See The 3D workbench.